Now there is an easy way to keep the water clean in your hot tub. Fits all hot tubs on the market!
AquaClarus is a filtration system for the hot tub that is hung over the edge. Requires no extra connections and can also be used in the cold season.
Submersible Skimmer with filter cartridge, pump 3600 l/h, 230/12V, 5m cord, transformer 70VA. The Skimmer provides to keep the water in the hot tub and even swimming pool clean.
Depending on the quality of the water it should run between ½ -2 hours. Impurities trapped in the filter can be easily removed and cleaned. There are also exchange filter. The filter system is suitable for hot tubs and small pools up to 10m ³.
Note! On the market there is a similar product but which produces nearly 50% lower flow (2000l/hour) in comparison with AquaClarus 4000 where the amount of water that passes through the filter is 3600l/hour. Aqua Clarus 4000 is a little more expensive but filters significantly more water.
NOTE! We also recommend that germicidal agents used in all bathers in the hot tub or pool. It is also important that the pH value of the proper level, or between 7.2-7.6
Filter cartridge that is used in the AquaClarus Filtration System
Inner diameter 55mm, outer 130mm and height 200mm. The filter which has a surface area of 1,2m² effectively takes care of impurities in the water supplied by the pump. It needs to be rinsed now and then depending on usage.
Function of the filter:
The filter is adjustable vertically. The water is suctioned from the surface, at a rate of up to 3600 l/hour, and is then passed through a "pre-filter" that catches larger particles. The water then passes through a removable filter that can be cleaned after use. At the bottom of the filter the purified water is pushed out and creates a circulation in the water so that impurities from the bottom are also lifted up to the surface and passed through the filter.
Because of that, the filtration system also works well as a "water stirrer" for hot tubs with heaters that lack a circulation system, such as interior heaters. Connection is made via a cable to a regular 230V wall socket. Between pump and socket is a 12 V transformer to the pump that is rated at 70W.